Fork-it

New pair of Bultaco Alpina Fork Tubes, will fit model 85, 250cc that was produced 1971-1973, these are tapered top forks for fitting in a Top Yoke that has no pinch bolts, may fit other brands that...

New pair of Bultaco Alpina Fork Tubes 1973-79, these will fit the Bultaco Enduro models below, that were fitted with Betor Forks when new, these tubes may also fit other brands that used Betor, Spain...

New pair of Bultaco Campera Fork Tubes, For Models produced 1961-1973, these are tapered top forks for fitting in a Top Yoke that has no pinch bolts, may fit other brands that also used Betor Forks...

New pair of Bultaco El Bandito Fork Tubes, For Models produced 1968-1972, these are tapered top forks for fitting in a Top Yoke that has no pinch bolts, may fit other brands that also used Betor...

New pair of Bultaco El Montadero Fork Tubes, For Models produced 1968-1972, these are tapered top forks for fitting in a Top Yoke that has no pinch bolts, may fit other brands that also used Betor...

New pair of Bultaco Frontera Fork Tubes, will fit the Bultaco Enduro models below, that were fitted with Betor Forks when new, these tubes may also fit other brands that used Betor, Spain forks...

New pair of Bultaco Frontera 74 Fork Tubes, will fit the Frontera 74cc and 125cc models that were fitted with Betor Forks Please check the length against the fork tube you are replacing, in case they...

New pair of Bultaco Matador Fork Tubes Tapered Top, For Models produced 1963-1970, for fitting in a Top Yoke that has no pinch bolts, may fit other brands that also used Betor Forks of the same era...

New pair of BULTACO MATADOR Fork Tubes , 1971-1977 Model Years, these are Straight Top forks for fitting in a Top Yoke that has pinch bolts, may fit other brands that also used Betor Forks of the...

New pair of Bultaco Pursang Fork Tubes, will fit the Bultaco Motocross models below as well as the last Mk12 Pursang model that was an Enduro (TT), these tubes may also fit other brands that used...

New pair of Bultaco Pursang Fork Tubes, will fit the Bultaco Motocross models below as well as the Spanish built Bultaco Metisse model that was fitted with Betor, Spain forks, 35mm Diameter, 560mm...

New Pair of Bultaco Pursang Fork Tubes, 35mm Diameter, 558mm Length, will fit the models as listed below, that were fitted with Betor forks as standard, please check the length against the fork tube...

New pair of Bultaco Sherpa S Fork Tubes, For Models produced 1962-1969, these are tapered top forks for fitting in a Top Yoke that has no pinch bolts, may fit other brands that also used Betor Forks...

New pair of Bultaco Sherpa S Fork Tubes, For Mk2 Models produced 1970-1972, these are straight top forks for fitting in a Top Yoke that has pinch bolts, may fit other brands that also used Betor...

New Pair of Bultaco Sherpa T Fork Tubes, 35mm Diameter, 560mm Length, will fit the models as listed below that were fitted with a tampered top yoke with no pinch bolts as fitted on the earlier models...

New Pair of Bultaco Sherpa T Fork Tubes, 35mm Diameter, 558mm Length, will fit the models as listed below that were fitted with a pinch bolt top yoke, not the tampered top yoke with no pinch bolts as...

Pair of Fantic 200cc Fork Tubes also Fantic 125cc Models with 35mm diameter and 580mm length for models listed below. These forks are for the later 125 and 200 Models, that have a double pinch bolt...

Pair of Fantic FANTIC 125-200cc Fork Tubes - 1979-82 Model Years for (TRIALS) with 35mm diameter and 580mm length for models listed below. These forks are for the early 125 and 200 Models, that have...

Pair of FANTIC 240cc Fork Tubes for (TRIALS) with 35mm diameter and 580mm length for models listed below. These Tubes are for Models that have a double pinch bolt on the lower fork outer casing were...

Pair of FANTIC CABALLERO Fork Tubes for Caballero 125 both enduro and MX models that were fitted with Marzocchi forks and are 35mm diameter with a choice of lengths from the standard 651mm to a...

Pair of FANTIC Monoshock Fork Tubes for Model SERIES 125, 205, 245, 305 : These are 35mm diameter and 580mm length for models listed below.  These forks are handed left and right, one side being...

Pair of FANTIC Monoshock Fork Tubes for Model SERIES 203, 243, 303: These are 35mm diameter and 580mm length for models listed below.  Manufactured as per the original OEM Forks made by...

Gilera GXR 125 Fork Tubes, For Enduro models, these are 35mm diameter and 721mm length, These may fit other Gilera enduro and MX models, but this is the only one we have fitted them to, if you know...

New Pair of Honda CR80 Fork Tubes : 1987-1995 Model Years, Will also fit Honda CRM50 and CRM80 of the same years, 35mm Diameter, 615mm Length, Fitted with Internal Bushing as per original Honda...

New Pair of Honda TLM 50 Fork Tubes : 1980-1985 Model Years, Will also fit Japanese and US Imported Motorcycles that Frame number starts with AD07, 30mm Diameter, 585mm Length, Fitted with Internal...

Pair of Honda TLR200 Fork Tubes for models listed below, these are 35mm diameter and 600mm in length and come with Fork Nuts, these come with all the internal bushing fitted as per the original Honda...

New Honda TLR200 Fork Nut Pair for 35mm Forks, New OEM Part made to the original specification, Will not fit TL and TLR Models that are fitted with 33mm forks, Forks not included

Pair of KTM MC5 Fork Tubes for KTM MC5 Motocross models listed below, these are 35mm diameter and 721mm in length, please check that the fork tubes that you are replacing are same diameter and...

Pair of Maico Fork Tubes for both GS enduro and MC MX models, these are 42mm diameter (41.7mm) and 760mm in length, please check that the fork tubes that you are replacing are same diameter and...

MONTESA 250/360 H6 Fork Tubes  for models listed below, these are 35mm diameter and 651mm in length, These are for Montesa Motorcycles that used Marzocchi Front Forks, please check that the fork...